江苏滨海液化天然气（LNG）项目开架式气化器包招标公告

【阅读次数：字号：大中小】【我要打印】【关闭】

招标公告

项目名称：江苏滨海液化天然气（LNG）项目开架式气化器采购

招标编号：0704-2040JDCP0163/01

日期：2020年3月30日

1．中化建国际招标有限责任公司（以下简称“招标机构”）受中海油江苏天然气有限责任公司委托，邀请合格投标人就江苏LNG接收站项目下列全新货物和有关服务进行国际公开招标, 现邀请投标人对下列货物和服务提交密封投标：

货物名称：开架式气化器

数量：4套（2套采购+2套按需选购）

交货期：

关境外提供的货物：

第一批于合同签订之日起210日到达中国上海港；

第二批于合同签订之日起450日到达中国上海港。

关境内提供的货物：

第一批于合同签订之日起180日到达江苏省盐城市滨海港区江苏LNG接收站业主指定现场；

第二批于合同签订之日起360日到达江苏省盐城市滨海港区江苏LNG接收站业主指定现场。

2．业绩和资格要求：

1）资质要求：

- 投标人必须是具有独立法人资格的开架式气化器制造商或代理商。

独立法人资格要求：关境内投标人应提供有效的营业执照、组织机构代码证、税务登记证或三证合一的营业执照等。关境外投标人应提供有效的独立法人证明。以证明投标人具有独立法人资格。

代理商要求：如果投标人所投的货物（气化器设备主体）不是投标人自己制造的，投标人应得到货物制造商的同意以及证明其在本次投标中唯一提供该货物的正式授权书。

- 压力容器部件的制造商应具备中华人民共和国特种设备制造许可证（压力容器）或国家质检总局特种设备许可办公室（SELO）颁发的制造许可证，且证书在有效期内。

- 制造商或设备的设计分供商应具备中华人民共和国特种设备设计许可证（压力容器）或美国机械工程师学会认证，且证书在有效期内。

2）财务要求：投标人应提供2016-2018年审计机构出具的财务审计报告及经审计的财务报表，包括资产负债表、现金流量表、利润表。

2016-2018年的年平均净资产：不低于等值3000万元人民币；

2016-2018年的年平均资产负债率：小于0.85。

3）业绩要求：自2009年1月1日至投标截至之日，制造商应至少具有2个中国境内LNG接收站开架式气化器的供货及成功投用业绩（业绩时间以开架式气化器设备在项目现场成功调试并出具单体调试或联合调试报告的时间为准），每个业绩中的开架式气化器处理能力不低于180t/h，运行时间不少于3年（时间以开架式气化器设备调试完成至今的时间计算）。提供相关证明材料。

相关证明材料包括：业绩合同关键页复印件（如合同首页、合同签订日期页、交货日期页、双方签字盖章页、供货范围/工作范围描述页、主要技术参数页等关键页面，原件备查）和设备现场调试报告（业主、监理等签字），或用户业绩反馈证明（用户盖章或法定代表人签字，并体现调试完成时间点）。未提供有效证明材料或证明材料数据不足的业绩将视为无效业绩。

4）质量要求：制造商应提供ISO9001质量管理体系认证证书，且证书在有效期内。代理商投标时应提供所代理的产品制造商的ISO证书。

3．有兴趣的合格投标人可通过以下方式获取招标文件：

从 2020年3月30日开始至2020年4月7日止，请登录中国海洋石油集团有限公司采办业务管理与交易系统（https://buy.cnooc.com.cn）的招标公告页面进行购买。首次登录必须先进行注册（免费），注册成功后，方可购买招标文件。购买过程必须全程在线操作，线下形式的汇款将不予接受。标书费支付成功后，投标人可自行下载招标文件。招标文件每套售价为2000元人民币或300美元，售后不退。如未在系统中购买招标文件，不可参加投标。另外，投标人还需要在机电产品招标投标电子交易平台（http://www.chinabidding.com/）注册成功并通过平台审核。

4．投标文件的递交：

投标截止时间（开标时间）: 2020年4月21日 10:00

投标文件送达地点：必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）。

开标地点：必联网（http://www.ebnew.com）或机电产品招标投标电子交易平台（http://www.chinabidding.com）。

投标人获取招标文件后需登录机电产品招标投标交易平台办理CA锁CA锁便于用来线上投标时使用，咨询全流程操作电话：010-58851111-8762或4000606000。

5．开标时间：定于2020年4月21日10:00时（北京时间）开标。届时请参加投标的代表出席开标仪式。

招标人：中海油江苏天然气有限责任公司

详细地址：江苏省南京市建邺区嘉陵江东街18号1栋4层

邮编：224599

联系人：康杰

联系电话：+86-10-8991 3475

电子信箱：kangjie@cnooc.com.cn

招标代理机构：中化建国际招标有限责任公司

详细地址：北京市东城区东直门外小街6号海油大厦4层

邮编：100027

联系人：施欣欣

联系电话：+86-10-8452 7959

电子邮箱：shixx2@cnooc.com.cn

Section5 Invitation for Bids (IFB)

Project: Jiangsu LNGTerminal Project Open RackVaporizer

Bid No: 0704-2040JDCP0163/01

Date: March. 30th, 2020

1. Procurement& TenderingCenterof CNOOC Procurement Dept. andCNCCC International Tendering Co.,Ltd.(hereinafter called “Tendering Agent”),for and on behalf of CNOOC Jiangsu Gas Co., Ltd (hereinafter called"Purchaser") invitessealedbids from eligible bidders for the supplyof following equipment:

Nameof Goods: Open RackVaporizer

Qty:four sets（2 sets purchase and 2 sets optional purchase）

DeliverySchedule:

Forgoods offered from outside PRC customs territory:

Thefirst batch arrived at Shanghai Port, P.R.China within 210 days from the date ofthe signing of the contract;

Thesecond batch arrived at Shanghai Port, P.R. China within 450 days from the dateof the signing of the contract.

Forgoods offered from within PRC customs territory:

Thefirst batch arrived at Jiangsu LNG Terminal Project Site (Address: Jiangsu LNGproject, Binhai harbour District, Yancheng City, Jiangsu Province, China.)within 180 days from the date of the signing of the contract;

The secondbatch arrived at Jiangsu LNG Terminal Project Site (Address: Jiangsu LNG project,Binhai harbour District, Yancheng City, Jiangsu Province, China.) within 360days from the date of the signing of the contract.

2. References and Qualification requirement:

1)Qualification requirement:

-Bidder shall be manufacturer or authorized agent designated by manufacturerwith the qualification of independent legal entity.

Bidderfrom within the PRC Customs Territory shall provide validbusiness license,Organization Code Certificate and tax registrationcertificate. Bidder from outside the PRC CustomsTerritory shall provide valid independent legal entitycertificate.

If thegoods (equipment body) is not manufactured by bidder, the bidder shall obtainthe only legal officialauthority of the manufacturer that the bidder couldprovide the goods for thebid in China.

-Manufacturers of pressure vessel components shall have Manufacturinglicense of special equipment People's Republic of China (pressure vessel) or Manufacturing license issued by thespecial licensing office (SELO) of the general administration of qualitysupervision within the validity period.

- The manufactureror sub-supplier of the design of the equipment shall have Design license ofspecial equipment People's Republic of China (pressure vessel) or certificateof authorization by The American society of mechanical engineers within thevalidity period.

2)Biddershall submit 2016-2018 audited financial report issued by auditing agency,including balancesheets, cash flowstatement, profit statement.

Averagenetassets of last three years (from 2016 to 2018): not less than RMB30,000,000Yuan or equivalent;

Averageasset-liability ratio of last three years (from 2016 to 2018): less than 0.85.

3) Manufacturer shall have at least 2 domestic LNG receivingterminal projects (design capacity not less than two million tons/year) withOpen RackVaporizer supply and successful application performances from January1, 2009 (The period should be subject to the successful commissioning on theproject site and the report of Unit or Joint commissioning issued), thecapacity of each Open RackVaporizer not less than 180t/h, the operating cycleshall not be less than 3 years(The time shall be calculated by the time up tonow that the commissioning of Open RackVaporizer has been completed). Thereferences shall be testified by proof materials.

The proof materials include: copy of key pages of contract (Thehomepage of contract, the sign date page of contract, the delivery date page ofcontract, the both parties signed and stamped page of contract, the descriptionpage of Goods scope or Work scope, the key pages of main technical parameters,the original copy for reference) and commissioning report (signature of ownerand supervisor), or User performance feedback certificate (seal of user orsignature of legal representative, and reflect the time point of commissioningcompletion). The performance without certification documents or insufficientevidence will be treated as invalid performance.

4）Manufacturershall have the ISO9001 quality management system certification and thecertificate is valid. The agent shall have the ISO certificate of the productmanufacturer.

3. The interested Bidders may obtain the bidding document byfollowing method: Please login at CNOOC Procurement Operation System(https://buy.cnooc.com.cn) on the page ofInvitation for bid for purchasingBidding Document from Mar. 30th, 2020 to Apr. 7th 2020. For the firsttime of login, a registration (free of charge) is needed and only aftersuccessful registration, Bidder can purchaseBidding documents online. The wholepurchasing process must be operated onlineand offline payment will not be accepted. After successful payment ofRMB 2000.00 or USD300.00 for each copy of Bidding Documents which isnon-refundable, Bidder may download the Bidding Documents. Bidder fails topurchase Bidding Documentsonline is not eligible to bid. In addition, thebidder need to succeed in the bidding electronic trading platform formechanical and electrical products (http://www.chinabidding.com/) registeredand through the platform review.

4. Submission of tender documents:

Deadline for bidding (bid opening time) : April 21, 2021 10:00am

Biddingdocuments delivery location: http://www.ebnew.com orhttp://www.chinabidding.com.

Biddingopening location: http://www.ebnew.com orhttp://www.chinabidding.com.

After obtaining the bidding documents, the bidder shall log on thetrading platform of bidding and tendering for mechanical and electricalproducts to handle the CA lock, which is convenient for online bidding. Forconsultation, the whole process can be operated by 010-58851111-8762 or4000606000.

5. Bids will be opened at 10:00a.m.(Beijingtime) on Apr. 21th, 2020.

Name of Purchaser: CNOOC Jiangsu Gas Co., Ltd

Address: Floor 4, Build 1, NO.18 compound Jialingjiang eaststreet, Jianye District, Jiangsu, China.

Contact Person: Kang Jie

Telephone: +86-10-8991 3475

E-mail: kangjie@cnooc.com.cn

Name of Tendering Agent:Procurement& Tendering Center ofProcurement Dept.of China National OffshoreOil Corporation and CNCCCInternational Tendering Co.,Ltd.

Address:4thFloor,CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China

Contactperson: Shi Xinxin

Telephone: +86-10-84527959

E-mail: shixx2@cnooc.com.cn